Topic
Explore articles about Wheel Fitment.
15 articles
The factory wheel size for the 2007–2008 Acura TL Type S (UA7) is 17x8.0 inches with a +45mm offset, a 5x114.3mm bolt pattern, and a 64.1mm center bor...
The Ford Expedition historically utilizes a 5-lug bolt pattern exclusively across its first-generation production run from 1997 through 2002, featurin...
Replacing or upgrading the wheels on a 2019 Honda Accord requires careful attention to factory specifications to ensure vehicle safety, handling perfo...
The 2017 Jeep Wrangler (JK/JKU generation) features a 5x5-inch lug pattern, which is equivalent to 5x127 mm in metric measurements. This vehicle utili...
For the 2016 Toyota Camry, the "sport" designations apply primarily to the SE, XSE, and the Special Edition trims. The 2016 Camry SE comes standard wi...
The 2015 Subaru WRX utilizes two primary factory rim sizes depending on the trim level: a 17 x 8.0-inch wheel for the Base trim and an 18 x 8.5-inch w...
The 2015 Subaru WRX uses a 5x114.3 mm (also known as 5x4.5 inches) bolt pattern. This specific measurement represents five lug holes arranged in a cir...
The 2013 Infiniti G37x requires specific wheel dimensions to maintain its performance and safety, most notably a 5x114.3mm bolt pattern, a 66.1mm cent...
The 2013 Ford Edge utilizes a 5x114.3mm (5x4.5 inches) bolt pattern. This specific configuration consists of five lug holes arranged in a circle with...
The 2013 Dodge Avenger utilizes two primary rim sizes depending on the trim level: 17-inch and 18-inch diameters. Standard models typically feature 17...
The 2009 Toyota Corolla features a wheel bolt pattern of 5x100mm, meaning it uses five lug nuts arranged in a circle with a 100-millimeter diameter. U...
The factory tire size for a 2009 Acura TSX depends primarily on its original factory wheel diameter, which came in either 17-inch or 18-inch configura...
Ads help support this site. They may be unavailable because of a connection issue, unavailable inventory, or a content blocker. If you use a blocker, allowing this site would help support our work.
