Skip to content
Lifestyle & Learning

Comprehensive Guide to AT4 Weight Specifications and Operational Context

In this article

The standard AT4 anti-armor weapon, specifically the M136 variant utilized by United States forces, carries a weight specification of approximately 6.7 kilograms (14.8 pounds). This weight encompasses the pre-loaded 84mm high-explosive anti-tank (HEAT) projectile housed within a disposable, glass-reinforced epoxy launcher, designed for ease of transport and immediate deployment by individual infantry soldiers in diverse combat environments.

While the "AT4" designation often surfaces in automotive contexts regarding GMC’s off-road trim levels, in the technical sphere of defense and engineering, it refers exclusively to the Swedish-designed 84mm unguided, man-portable, single-shot recoilless smoothbore weapon. Understanding the weight specification of the AT4 requires looking beyond a single number; one must consider the variations between specialized models, the materials used to achieve its portability, and the tactical context that justifies its place in a modern soldier’s combat loadout.

As of 2026, the AT4 remains one of the most widely used light anti-armor weapons globally, balancing the scales between destructive capability and the physical burden placed on the operator.

The Evolution and Design Philosophy of the AT4

The AT4 was developed by Saab Bofors Dynamics (formerly Förenade Fabriksverken) in the late 1970s and early 1980s. Its primary design goal was to replace the aging M72 LAW (Light Anti-Tank Weapon) and the Miniman. While the M72 was exceptionally light, its 66mm rocket lacked the penetration necessary to defeat modern Main Battle Tanks (MBTs) of the era.

The engineering challenge was to create a weapon that could penetrate significantly thicker armor while remaining light enough for a single soldier to carry in addition to their standard rifle, ammunition, and gear. The solution was a recoilless system rather than a rocket-propelled one. In a recoilless design, the propellant gases are vented out the rear of the tube, counteracting the recoil of the projectile moving forward. This eliminates the need for heavy, reinforced barrels found in traditional artillery, allowing the AT4 to use a lightweight fiberglass tube.

The "AT4" name is a clever phonetic wordplay on its 84mm caliber (Eighty-Four). By standardizing on this caliber, Saab was able to utilize the existing projectile technology from the Carl Gustaf 84mm recoilless rifle, a reusable system, and adapt it into a cheaper, disposable format.

Detailed Weight Specifications by Variant

The weight of an AT4 system varies based on the specific mission profile it is designed to address. The evolution of the platform has seen the introduction of "Confined Space" (CS) capabilities and enhanced lethality, both of which impact the overall mass of the unit.

The Standard M136 (AT4 HEAT)

The baseline model used by the US Army, the M136, weighs 6.7 kg (14.8 lbs). It is approximately 101.6 centimeters (40 inches) long. This version is optimized for open-field engagements against armored personnel carriers, landing craft, and older tank models. The weight is distributed relatively evenly, though it is slightly front-heavy due to the warhead's position.

AT4-CS (Confined Space)

The introduction of the CS variant was a significant leap in urban warfare technology. Standard recoilless weapons produce a massive "backblast" of fire and pressure, making them lethal to the operator if fired from inside a building or a confined room. The AT4-CS incorporates a saltwater counter-mass in the rear of the tube. When fired, this liquid is atomized and ejected, absorbing much of the backblast energy.

  • Weight Spec: The addition of the counter-mass increases the weight to approximately 7.5 kg to 8 kg (16.5 to 17.6 lbs), depending on the specific sub-variant.

AT4-ER (Extended Range) and HP (High Penetration)

Modern armor has become increasingly resilient. To counter this, the HP variant utilizes a more sophisticated shaped charge, while the ER version utilizes an improved propellant system to extend the effective range from 300 meters to 600 meters or more.

  • Weight Spec: These improvements generally keep the weight within the 7 kg to 9 kg range. While heavier than the original M136, they provide a much higher "kill probability" against modern targets.
Variant Weight (kg) Weight (lb) Length (cm) Primary Target
AT4 HEAT (Standard) 6.7 14.8 101.6 Light Armor / APCs
AT4-CS HEAT 7.5 16.5 104.0 Urban Armor Targets
AT4-CS AST 8.9 19.6 104.0 Structures / Bunkers
AT4-CS ER 9.0 19.8 104.0 Long-range threats
AT4 HP (High Penetration) 7.8 17.2 101.6 Main Battle Tanks
Spierings SK597-AT4 Specifications - Full Technical Data
Spierings SK597-AT4 Specifications - Full Technical Data

Materials and Engineering: How Weight is Controlled

The AT4’s weight is a direct result of meticulous material selection. To maintain structural integrity during the high-pressure event of firing while keeping the system disposable, Saab engineers utilized a combination of polymers and alloys.

  1. Outer Tube: The primary barrel is constructed from glass-reinforced epoxy. This material offers an incredibly high strength-to-weight ratio. It is non-corrosive and can withstand the extreme heat of the propellant burn for the fraction of a second required for the projectile to exit.
  2. Aluminum Components: Small internal structural rings and the venturi nozzle (the funnel-shaped rear) are often made from high-grade aluminum. This provides the necessary heat resistance and rigidity at the rear of the weapon where the gas pressure is most volatile.
  3. The Projectile: The 84mm projectile itself accounts for a significant portion of the weight. It includes the shaped charge (copper liner and high explosives), the fuse mechanism, and the folding fins that stabilize the round in flight.
  4. Sights and Furniture: The AT4 features flip-up plastic sights. By avoiding complex optical glass in the standard version, weight is kept down. However, modern AT4s often include a mounting rail (Picatinny) for night vision or red-dot sights, which can add 0.5 to 1.1 kg to the operational carrying weight.

Operational Context: The "Load" vs. The "Lethality"

In the context of modern infantry operations in 2026, weight is the soldier's greatest enemy. A standard rifleman might already be carrying 30 to 45 kg (66 to 100 lbs) of equipment, including body armor, water, ammunition, and communications gear. Adding a 6.7 kg AT4 is a significant physical commitment.

The Disposable Advantage

The "context" of the AT4 weight is its disposability. Unlike the Carl Gustaf M4 (which weighs about 6.6 kg empty, plus the weight of each 3-4 kg round), the AT4 is a "fire and forget" asset in the logistical sense. Once the round is fired, the soldier discards the tube. This immediately reduces their load by nearly 7 kg, increasing mobility for the remainder of the engagement or the extraction phase.

Tactical Versatility

The AT4 is typically not issued to every soldier but distributed based on the mission. In a defensive posture against mechanized infantry, a squad may carry multiple units. The weight-to-performance ratio is considered the "sweet spot" for light infantry. It provides significantly more punch than the 2.5 kg M72 LAW but is far more portable than an FGM-148 Javelin system, which weighs over 22 kg (approx. 49 lbs) and requires complex assembly.

For more information on current infantry equipment standards, the US Army Acquisition Support Center provides updated technical manuals and procurement data.

Comparative Weight Analysis: AT4 vs. Competitors

To understand if the AT4 is "heavy" or "light," one must compare it to its peers in the 2026 battlefield landscape.

  • M72 LAW (USA): At roughly 2.5 kg, the LAW is the king of portability. However, its 66mm warhead is often insufficient against modern reactive armor, making the AT4’s extra 4 kg a necessary trade-off for lethality.
  • NLAW (UK/Sweden): The Next Generation Light Anti-Tank Weapon is a guided system. It weighs roughly 12.5 kg (27.5 lbs). While it is much heavier than the AT4, it offers "top-attack" capabilities to hit a tank's thinnest armor. The AT4 remains the preferred choice for unguided, direct-fire needs due to being nearly half the weight.
  • RPG-7 (Russia/Global): The unloaded launcher weighs about 7 kg, but each rocket adds 2 to 4.5 kg. Because it is a reusable system, the long-term carry weight for a single soldier is higher if they carry multiple rounds.

The AT4 sits firmly in the "medium-light" category, designed for the soldier who needs to be able to destroy a fortified bunker or a flanking armored vehicle without the encumbrance of a dedicated anti-tank guided missile (ATGM) team.

Frequently Asked Questions

Does the AT4 weight change when it is fired?

Yes, significantly. The projectile and the internal propellant account for roughly 2.5 to 3 kg of the total weight. Once fired, the remaining fiberglass tube and the firing mechanism weigh approximately 3.7 to 4 kg. However, since the AT4 is designed as a single-use, disposable weapon, the "empty" weight is functionally irrelevant to the mission—the operator simply drops the tube and moves to a new position.

Why is the AT4-CS heavier than the standard AT4?

The AT4-CS (Confined Space) variant includes a liquid counter-mass (usually saltwater) located in the rear of the launch tube. This counter-mass is necessary to counteract the backblast, allowing the weapon to be fired safely from within buildings. This added liquid and the reinforced container for it add approximately 0.8 kg to 1.3 kg to the system's total weight.

Can the weight of the AT4 be reduced with modern materials?

While carbon fiber could theoretically reduce the weight of the launch tube further, the cost-to-benefit ratio has historically favored glass-reinforced epoxy. Since the weapon is disposable, using expensive carbon fiber would significantly increase the unit cost (currently around $1,500 to $2,500 USD) for a marginal weight saving that might not justify the loss of mass required to handle the internal ballistics.

Is there a difference between Swedish and US AT4 weight specs?

Generally, no. The M136 is the US designation for the AT4. While there may be slight differences in the slings, bumpers, or night-vision brackets attached to the tube, the core weight of the weapon remains consistent across NATO-standard versions.

How does the AT4 weight affect its accuracy?

The weight of the system acts as a stabilizer. A weapon that is too light would be difficult to hold steady against wind or the operator's own breathing. The 6.7 kg mass provides enough inertia to help the soldier maintain a steady "cheek weld" and sight picture, which is critical for an unguided weapon with an effective range of 300 meters.

Practical Recommendation for Technical Evaluation

When evaluating the AT4 for procurement or tactical planning in 2026, it is essential to prioritize the variant over the base weight. If the operational theater is primarily urban, the 1-kg weight penalty for the AT4-CS is non-negotiable for safety. Conversely, for airborne or mountain infantry where every gram is scrutinized, the standard M136 or the newer lightweight AT4-HE (High Explosive) models offer the best balance of mobility and firepower.

Always verify the specific model's weight including any attached optics or mounting rails, as these can push the "carry weight" closer to 8 kg, altering the stamina calculations for long-distance foot patrols. For official technical specifications, professionals should consult the latest documentation from Saab Group or their respective national defense procurement agencies.